Printing Basics
3-3 KX Driver
4
In the Basic tab, click the Print Size list and select the preferred output paper size.4
5
Confirm the proper paper size is loaded.
Click OK to return to the Print dialog box. 5
6
Click OK to start printing. 6
The source document is automatically scaled to fit the output paper size.
Media Types
The printing system automatically selects the paper size specified in the Page Sizes
setting in the Basic tab by default when you are printing on regular paper. However,
the printing system supports a wide variety of printing media.
You can specify the media type in the Media type setting for media selection when
using non-standard types of printing media, such as recycled paper, labels, or
transparencies. You can also specify the finishing settings for best results.
Labels, transparencies, and envelopes must be printed using the MP tray. Ensure
the paper is properly loaded by following the instructions outlined in the printing
system's Operation Guide.
Note: The default setting is for Source and Media type to be separate items in the
dialog box, but it is possible to combine them using a setting in Compatibility
Settings. If they are combined, the Media type list is not available. To change the
Combine setting, open Printer Properties from the Microsoft Windows Printer and
Faxes window, go to Device settings and then Compatibility Settings, and then
clear the Combine source and media type lists selection.
When paper is properly loaded in the paper cassette, the printing system can
automatically detect the paper size. The following steps specify the media settings:
To Next Page
Loading...
