Kyocera KM-C2630D

10-1
Section 10 MAINTENANCE AND OPERATION
INFORMATION
Cleaning the original cover
Lift open the original cover. Wipe the back side of the original cover
with a soft cloth dampened with alcohol or mild detergent.
* Never use thinner or other organic solvents to clean the original
cover.
Cleaning the platen
Lift open the original cover. Wipe the platen with a soft cloth
dampened with alcohol or mild detergent.
* Never use thinner or other organic solvents to clean the platen.
* If you are using the optional Document Processor and copies
come out with black lines on them, it means that the slit glass
(a) is dirty. Wipe the slit glass with a soft, dry cloth or with a soft
cloth moistened with alcohol.
* Never use water, thinner or organic solvents to clean the slit
glass.
Cleaning the copier
CAUTION
For safety purposes, ALWAYS remove the power
plug from the outlet when performing cleaning
operations.
(a)