Kyocera TASKalfa 3050ci - Page 126

2LK/2LN/2LM/2LC-2
1-3-32
U031 Checking switches and sensors for paper conveying
Description
Displays the on-off status of each paper detection switch or sensor on the paper path.
Purpose
To check if the switches and sensors for paper conveying operate correctly.
Method
1. Press the start key.
2. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in
reverse.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
MPT Jam MP feed sensor (MPFS)
Cassette1 Feed Feed sensor 1 (FS1)
Cassette2 Feed Feed sensor 2 (FS2)
Feed2(Feed B) Paper conveying sensor (PCS)
Regist Registration sensor (RS)
Belt Jam Transfer belt sensor (TRBLS)
Exit Feed Fuser eject sensor (FUES)
DU1 Duplex sensor 1 (DUS1)
DU2 Duplex sensor 2 (DUS2)
Bridge2 Feed Bridge conveying sensor 2 (BRCS2)
Bridge Exit Bridge eject sensor (BRES)
Exit Paper Eject full sensor (EFS)
Fuser Feed Loop sensor (LPS)
Feed1(Mid) Middle sensor (MS)
Exit Job Separator Switchback sensor (SBS)
Regist Loop Sensor Regist deflection sensor (RDS)