2LK/2LN/2LM/2LC-2
1-3-86
U119 Setting the drum
Description
Sets drum sensitivity.
Purpose
To set the drum after replacing the drum unit or laser scanner unit.
Method
1. Press the start key.
2. Select [Execute].
3. Press the start key. Drum setup is commenced.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
U122 Checking the transfer belt unit number
Description
Displays the number of the transfer belt unit for checking.
Purpose
To check the number of the transfer belt.
Method
1. Press the start key.
The current number of the transfer belt is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
To Next Page
Loading...
