Kyocera TASKalfa 3050ci - Poster

2LK/2LN/2LM/2LC-2
1-3-94
U140 Setting: [Sleeve AC]
1. Select the item to be set.
2. Change the setting value using the +/- keys or numeric keys.
*: 55 ppm model only.
3. Press the start key. The value is set.
Setting: [Mag DC]
1. Select the item to be set.
2. Change the setting value using the +/- keys or numeric keys.
*: 55 ppm model only.
3. Press the start key. The value is set.
Item No. Description
Display Description
Setting
range
Initial setting
30ppm 35ppm 45ppm 55ppm
C Developer sleeve roller AC bias
for cyan
0 to 255 175 175 155 155
M Developer sleeve roller AC bias
for magenta
0 to 255 175 175 155 155
Y Developer sleeve roller AC bias
for yellow
0 to 255 175 175 155 155
K Developer sleeve roller AC bias
for black
0 to 255 175 175 155 155
B/W* Developer sleeve roller AC bias
in black/white mode
0 to 255 - - - 155
Display Description
Setting
range
Initial setting
30ppm 35ppm 45ppm 55ppm
C Developer magnet roller DC bias
for cyan
0 to 255 130 130 155 155
M Developer magnet roller DC bias
for magenta
0 to 255 130 130 155 155
Y Developer magnet roller DC bias
for yellow
0 to 255 130 130 155 155
K Developer magnet roller DC bias
for black
0 to 255 130 130 155 155
B/W* Developer magnet roller DC bias
in black/white mode
0 to 255 - - - 155