2LK/2LN/2LM/2LC-2
1-3-124
U243 Checking the operation of the DP motors
Description
Turns the motors or solenoids in the DP on.
Purpose
To check the operation of the DP motors and solenoids.
Method
1. Press the start key.
2. Select the item to be operated.
3. Press the start key. The operation starts.
*1: Reversed DP only. *2: Dual scan DP only.
4. To turn each motor off, press the stop key.
Completion
Press the stop key when operation stops. The screen for selecting a maintenance item No. is dis-
played.
Item No. Description
Display Description
Feed Motor DP original feed motor (DPOFM) is turned on
Conv Motor DP original conveying motor (DPOCM) is turned on
Rev Motor
*1
DP switchback motor (DPSBM) is turned on
Lift Motor DP lift motor (DPLM) is turned on
Rev Press Sol
*1
DP pressure solenoid (DPPSOL) is turned on
Rev Branch Sol
*1
DP feedshift solenoid (DPFSSOL) is turned on
Eject Motor
*2
DP eject motor (DPEM) is turned on
Regist Motor
*2
DP registration motor (DPRM) is turned on
DP Fan
*2
DP fan motor 1 (DPFM1) is turned on
CIS Fan
*2
DP fan motor 2 (DPFM2) is turned on
To Next Page
Loading...
