2LK/2LN/2LM/2LC-2
1-3-130
U246 Setting: [Staple HP]
1. Select [Staple HP].
2. Change the setting value using the +/- keys or numeric keys.
When staple positions are off toward the front side of the machine (sample 1), increase the
setting value. When staple positions are off toward the rear side of the machine (sample 2),
decrease the setting value.
Figure 1-3-21
3. Press the start key. The value is set.
Method: [Booklet]
1. Select the item to set.
Item No. Description
Description Setting
range
Initial
setting
Change in
value per step
Adjustment of front and back stapling home position -15 to 15 0 0.19 mm
Sample 2
Sample 1
Display Description
Width Up HP Adjustment of upper side registration home position
Width Down HP Adjustment of lower side registration home position
Staple Pos1 Adjustment of booklet stapling position for A4/Letter size
Staple Pos2 Adjustment of booklet stapling position for B4/Legal size
Staple Pos3 Adjustment of booklet stapling position for A3/Ledger/8K size
Booklet Pos1 Adjustment of center folding position for A4/Letter size
Booklet Pos2 Adjustment of center folding position for B4/Legal size
Booklet Pos3 Adjustment of center folding position for A3/Ledger/8K size
Three Fold Adjustment of tri-folding position
To Next Page
Loading...
