2LK/2LN/2LM/2LC
1-3-165
U412 Error codes
Setting: [On/Off Config]
1. Select On or Off.
ON is automatically set after the correction is complete.
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Codes Description Codes Description
S001 Patch not detected E001 Engine status error
S002 Original deviation in the main
scanning direction
E002 Spotted background error
E003 Density error
S003 Original deviation in the auxil-
iary scanning direction
E004 Uneven density error
EFFF Engine other error
S004 Original inclination error C001 Controller error
S005 Original type error CFFF Controller other error
SFFF Scanner other error
Display Description
On Uneven density correction is enabled
Off Uneven density correction is disabled
To Next Page
Loading...
