2LK/2LN/2LM/2LC
1-3-186
U486 Setting color/black and white operation mode
Description
When color and B/W documents are mixed, sets operation mode after a color document is
detected.
Purpose
To ensure productivity when copying color and B/W documents in ACS mode, select Mode3.
However, selecting Mode3 will increase the maintenance count for cyan, magenta, and yellow
color developer units even when there is a B/W original after a color original.
Setting
1. Press the start key.
2. Select the mode.
Initial setting: Mode2
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Mode1 Line speed: Color and B/W line speed is switched according to each original
Controlling developer motor MCY: Color and B/W mode is switched accord-
ing to each original
Mode2 Line speed: Fixed at color line speed
Controlling developer motor MCY: Color and B/W mode is switched accord-
ing to each original
Mode3 Line speed: Fixed at color line speed on and after a color original
Controlling developer motor MCY: Fixed at color mode on and after a color
original
Auto Automatic selection of Mode1 to 3 depending on the using pattern
To Next Page
Loading...
