Kyocera TASKalfa 3050ci - Checking the Remaining Amount of Toner and Paper (Paper;Supplies)

2LK/2LN/2LM/2LC-2
1-4-3
Code Contents Conditions
Jam
location*
0000 Initial jam The power is turned on when a sensor in the con-
veying system is on.
-
0100 Secondary paper feed
request time out
Secondary paper feed request given by the con-
troller is unreachable.
-
0101 Waiting for process package
to become ready
Process package won’t become ready. -
0102 Waiting for toner package to
become ready
Toner package won’t become ready. -
0103 Waiting for the image-sus-
taining package to become
ready
The image-sustaining package won’t become
ready.
-
0104 Waiting for conveying pack-
age to become ready
Conveying package won’t become ready. -
0106 Paper feeding request for
duplex printing time out
Paper feeding request for duplex printing given by
the controller is unreachable.
-
0107 Waiting for fuser package to
become ready
Fuser package won’t become ready. -
0108 Waiting for option package to
become ready
Option package won’t become ready. -
0110 Paper conveying unit open The paper conveying unit is opened during print-
ing.
E
0111 Front cover open The front cover is opened during printing. -
0112 Duplex cover open The duplex cover is opened during printing. F
0113 Paper conveying cover open The paper conveying cover is opened during print-
ing.
E
0114 Bridge cover open The bridge cover is opened during printing. J
0115 Bridge eject cover open The bridge eject cover is opened during printing. J
0131 MP lift sensor upper limit
detection
MP lift sensor 1 (DPLS1) does not turn on within
specified time of the MP lift plate rising.
D
0200 Machine sequence error A sequence error has caused. -
0210 PF paper conveying cover
open
The PF paper conveying cover is opened during
printing.
E
0211 SM paper conveying cover
open
The SM paper conveying cover is opened during
printing.
L
0212 SM top cover open The SM top cover is opened during printing. L
0213 SD cover open The SD cover is opened during printing. L
0214 PF paper conveying cover
(side) open
The PF paper conveying cover (side) is opened
during printing.
M
0215 Side multi tray release The side multi tray is released during printing. L
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).