2LK/2LN/2LM/2LC-2
1-2-20
Procedure
1. Press the power key on the operation
panel to off. Make sure that the power
indicator and the memory indicator are
off before turning off the main power
switch. And then unplug the power
cable from the wall outlet.
2. Fit the key counter socket assembly to
the key counter retainer using two
screws and nut.
3. Fit the key counter mount to the key
counter cover using two screws.
4. Fit the key counter retainer to the key
counter mount using two screws.
Figure 1-2-22
5. Pull the paper conveying unit out.
6. Remove two screws and then remove
the ISU right cover.
7. Remove the screw and five hooks and
then remove the right upper cover.
Figure 1-2-23
M3 x 6 flat-head
screws
Key counter
mount
Key counter cove
M4 x 6 screw
M4 x 6 screw
Key counter
socket assembly
M4 x 6
screw
M3 nut
Key counter
retainer
M4 x 6 screw
ISU right
cover
Screws
Right upper cover
Screw
Right
upper cover
Hooks
Hook
Hook
To Next Page
Loading...
