Kyocera TASKalfa 3050ci - Page 545

2LK/2LN/2LM/2LC
2-2-7
18. Toner motor C (TM-C)........................... Replenishes toner to the developer unit C.
19. Toner motor Y (TM-Y) ........................... Replenishes toner to the developer unit Y.
20. Developer motor K (DEVM-K)............... Drives the developer unit K.
21. Developer motor MCY (DEVM-MCY) ... Drives the developer units M, C and Y.
22. Vibration motor K (VM-K)...................... Toner lump in the developer unit K vibrates.
23. Vibration motor M (VM-M)..................... Toner lump in the developer unit M vibrates.
24. Vibration motor C (VM-C) ..................... Toner lump in the developer unit C vibrates.
25. Vibration motor Y (VM-Y)...................... Toner lump in the developer unit Y vibrates.
26. LSU cleaning motor (LSUCM) .............. Drives LSU dust shield glass cleaning system.
27. Waste toner motor (WTM)..................... Drives waste toner system.
28. Transfer motor (TRM) ........................... Drives the transfer section.
29. Transfer cleaning motor (TRCM) .......... Drives the transfer cleaning section.
30. Color release motor (CRM)................... Drives separation of primary transfer rollers M, C, and Y.
31. Transfer skew motor (TRSM)................ Drives skew of transfer tension roller.
32. Transfer release motor (TRRM)............ Drives separation of secondary transfer roller.
33. Fuser motor (FUM) ............................... Drives the fuser section.
34. Fuser release motor (FURM) ................ Drives fuser pressure release.
35. Eject motor (EM)................................... Drives the eject section.
36. Duplex motor 1 (DUM1)
*2
...................... Drives the duplex section.
37. Duplex motor 2 (DUM2)
*2
...................... Drives the duplex section.
*1: 30 ppm model /35 ppm model only.
*2: 45 ppm model /55 ppm model only.