Kyocera TASKalfa 3050ci - Page 56

2LK/2LN/2LM/2LC-2
1-2-32
10. Cut out the aperture plate on the tray
cover using nippers.
11. Fit the tray cover to the tray stay using
four M4 x 8 screws.
Figure 1-2-41
12. Fit the key counter cover retainer using
two M4 x 20 tap-tight S screws.
Figure 1-2-42
M4 x 8 screws
Aperture
Tray cover
Tray cover
M4 x 8 screws
Key counter
cover retainer
M4 x 20
tap-tight S
screw
M4 x 20
tap-tight S
screw