Kyocera TASKalfa 3050ci - Page 566

2LK/2LN/2LM/2LC
2-3-16
YC5
1 GND - - Ground
Connected to
feed PWB 1
2 M_TEMP - - Not used
3 LOOP_SENS I 0/3.3 V DC LPS: On/Off
4 GND - - Ground
5 EDGE_FAN_H O 0/24 V DC FUFM: On/Off
6 DU1_MOT_PD O 0/3.3 V DC DUM1 control signal
7 DU1_MOT_CLK O 0/3.3 V DC (pulse) DUM1 clock signal
8 DU1_MOT_REM(
CL_H)
O 0/3.3 V DC DUM1/DUCL1: On/Off
9 GND - - Ground
10 EXIT_FAN O 0/24 V DC EFM: On/Off
11 DU_ENTER_SEN
S
I 0/3.3 V DC DUS1: On/Off
12 TCON_SET - - Not used
13 GND - - Ground
14 TRANS_MOT_RE
M
O 0/3.3 V DC TRCM: On/Off
15 TRANS_MOT_CL
K
O 0/3.3 V DC (pulse) TRCM clock signal
16 TRANS_MOT_RD
Y
I 0/3.3 V DC TRCM ready signal
17 TRANS_MOT_DI
R
O 0/3.3 V DC TRCM drive switch signal
18 TRANS_MOT_BR
K
O 0/3.3 V DC TRCM break signal
19 GND - - Ground
20 DRM_MOT_BK_R
EM
- - Not used
21 DRM_MOT_BK_R
DY
- - Not used
22 DRM_MOT_BK_D
IR
- - Not used
23 DRM_MOT_BK_B
RK
- - Not used
24 GND - - Ground
25 DLP_MOT_BK_R
EM
- - Not used
26 DLP_MOT_BK_C
LK
- - Not used
27 DLP_MOT_BK_R
DY
- - Not used
Connector Pin Signal I/O Voltage Description