Kyocera TASKalfa 3050ci - Page 599

2LK/2LN/2LM/2LC
2-3-49
YC9
34 GND - - Ground
Connected to
CCD PWB
35 CCDSEL O 0/3.3 V DC Select signal
36 GND - - Ground
37 AFE_MCLK O 0/3.3 V DC (pulse) Clock signal
38 GND(AFE_SHD) - - Ground
39 CLPIN O 0/3.3 V DC Clamp signal
40 GND(AFE_SHP) - - Ground
YC11
1 +5.1V O 5 V DC 5 V DC power to CCDPWB
Connected to
CCD PWB
2 GND - - Ground
3 +10V O DC10V 10 V DC power to CCDPWB
4 GND - - Ground
5 +3.3V O 3.3 V DC 3.3 V DC power to CCDPWB
6 GND - - Ground
YC12
1GND(SPARE) -- Ground
Connected to
DP main
PWB
2 DP_TMG I 0/3.3 V DC DPTS: On/Off
3 DP_RDY I 0/3.3 V DC ready signal
4 DP_SEL O 0/3.3 V DC Select signal
5 DP_CLK O 0/3.3 V DC (pulse) Clock signal
6 DP_SO O 0/3.3 V DC (pulse) Serial communication data signal
7 DP_SI I 0/3.3 V DC (pulse) Serial communication data signal
8 DP_OPEN I 0/3.3 V DC DPOCSW: On/Off
9 Reserve - - Not used
10 GND - - Ground
11 GND - - Ground
12 GND - - Ground
13 Reserve - - Not used
14 24V2 O 24 V DC 24 V DC power to DPMPWB
15 24V2 O 24 V DC 24 V DC power to DPMPWB
16 24V2 O 24 V DC 24 V DC power to DPMPWB
YC13
1 GND - - Ground
Connected to
original size
sensor
2 ORG_SW I 0/3.3 V DC OSS: On/Off
3 +5.1V O 5 V DC 5 V DC power to OSS
Connector Pin Signal I/O Voltage Description