2LK/2LN/2LM/2LC
2-3-62
YC10
1 3.3V2 O 3.3 V DC 3.3 V DC power to DRPWB-M
Connected to
drum unit M
2 EEP_SCL1 O 0/3.3 V DC (pulse) EEPROM clock signal
3 EEP_SDA1 I/O 0/3.3 V DC (pulse) EEPROM data signal
4 GND - - Ground
5 DRM_ADR0_M - - Not used
6 DRM_ADR1_M - - Not used
7 24V O 24 V DC 24 V DC power to CL-M
8 ERS_M_REM O 0/24 V DC CL-M: On/Off
YC11
1 TPD_TEMP_M I Analog Developer thermistor M detection sig-
nal
Connected to
developer
unit M
2 DLP_VCONT_M_
1
O 0/3.3 V DC DEVPWB-M control signal
3 TPD_M_1 I Analog DEVPWB-M detection signal
4 TN_CLK_M O 0/3.3 V DC (pulse) Clock signal
5 GND - - Ground
6 DLP_ADR1_M - - Not used
7 DLP_ADR0_M - - Not used
8 EEP_SDA1 I/O 0/3.3 V DC (pulse) EEPROM data signal
9 EEP_SCL1 O 0/3.3 V DC (pulse) EEPROM clock signal
10 3.3V2 O 3.3 V DC 3.3 V DC power to DEVPWB-M
11 3V O 3.3 V DC 3.3 V DC power to VM-M
12 VIB_MOT O 0/24 V DC VM-M: On/Off
YC12
1 3.3V2 O 3.3 V DC 3.3 V DC power to DRPWB-C
Connected to
drum unit C
2 EEP_SCL1 O 0/3.3 V DC (pulse) EEPROM clock signal
3 EEP_SDA1 I/O 0/3.3 V DC (pulse) EEPROM data signal
4 GND - - Ground
5 DRM_ADR0_C - - Not used
6 DRM_ADR1_C - - Not used
7 24V O 24 V DC 24 V DC power to CL-C
8 ERS_C_REM O 0/24 V DC CL-C: On/Off
Connector Pin Signal I/O Voltage Description
To Next Page
Loading...
