Kyocera TASKalfa 3050ci - Page 639

2LK/2LN/2LM/2LC
2-3-89
YC4
1 NC - - Not used
Connected to
drum motor
C/Y
2 NC - - Not used
3 NC - - Not used
4 NC - - Not used
5 NC - - Not used
6 NC - - Not used
7 NC - - Not used
8 NC - - Not used
9 DRM_C_BRAKE - - Not used
10 DRM_Y_BRAKE - - Not used
11 DRM_C_GAIN - - Not used
12 DRM_Y_GAIN - - Not used
13 DRM_C_CW/
CCW
O 0/24 V DC DRM-C: On/Off
14 DRM_Y_CW/
CCW
O 0/24 V DC DRM-Y: On/Off
15 DRM_C_LD O 0/3.3 V DC DRM-C control signal
16 DRM_Y_LD O 0/3.3 V DC DRM-Y control signal
17 DRM_C_CLK O 0/3.3 V DC (pulse) DRM-C clock signal
18 DRM_Y_CLK O 0/3.3 V DC (pulse) DRM-Y clock signal
19 DRM_C_S/S O 0/3.3 V DC DRM-C control signal
20 DRM_Y_S/S O 0/3.3 V DC DRM-Y control signal
21 PGND - - Ground
22 PGND - - Ground
23 +24V1 O 24 V DC 24 V DC power to DRM-C
24 +24V1 O 24 V DC 24 V DC power to DRM-Y
YC5
1 NC - - Not used
Connected to
drum motor
K/M
2 NC - - Not used
3 NC - - Not used
4 NC - - Not used
5 NC - - Not used
6 NC - - Not used
7 NC - - Not used
8 NC - - Not used
9 DRM_BK_BRAKE - - Not used
10 DRM_M_BRAKE - - Not used
11 DRM_BK_GAIN - - Not used
Connector Pin Signal I/O Voltage Description