2-35
Installing and Setting up the Machine > Network Setup
Wired Connection by Using LAN Cable
1
Connect the machine with a computer
1 Connect the machine with a computer via LAN cable when the machine is powered on.
2 Turn on the computer.
IP address (link local address) of the machine and computer is generated automatically.
2
Insert the DVD.
3
Display the screen.
After clicking [Accept] in the license dialog box, depending on your region, a message about
resource and energy conservation may appear. Read the message and click [OK].
4
Select [Maintenance].
5
[Wi-Fi Setup Tool] > [Run]
• Installation on Windows must be done by a user logged on with administrator privileges.
• If the "Welcome to the Found New Hardware Wizard" dialog box displays, select
[Cancel].
• If the autorun screen is displayed, click [Run setup.exe].
• If the user account management window appears, click [Yes] ([Allow]).
1Click [View License Agreement]
and read the License Agreement.
2Click [Accept].
1
2
To Next Page
Loading...
