Kyocera TASKalfa 7353ci - Quick Setup Wizard

2-44
Installing and Setting up the Machine > Quick Setup Wizard
Quick Setup Wizard
For FAX functions, paper settings, Energy Saver functions and network settings, the following settings can be configured
in a wizard-style screen.
FAX Setup Configures basic fax settings. This function is displayed when the optional FAX Kit
is installed.
FAX Operation Guide
1. Dialing/RX Mode Dialing Mode (Port 1, Port 2
*1
)
*2
Reception Mode
Auto (DRD)
*3
2. Local FAX Information Local FAX Name (Port 1, Port 2
*1
)
Local FAX Number (Port 1, Port 2
*1
)
Local FAX ID
TTI
3. Sound FAX Speaker Volume
FAX Monitor Volume
Job Finish Buzzer
4. Rings Rings (Normal)
*4
Rings (TAD)
*4
Rings (FAX/TEL)
*4
5. Paper Source/Output Paper Source Settings
Specify by Media Type
*5
Specify by Cassette
*6
Paper Output (Port 1, Port 2
*1
)
Reduced RX Size
6. Redial Retry Times
Power Off Setup Show Power Off Message —
E-mail Setup Set SMTP server name and sender address to enable mail sending.
1. E-mail SMTP Server Name
Sender Address
Network Setup Configures network settings.
1. Network Network Selection
*7
Wi-Fi
*8
DHCP
*9
IP Address
*10
Subnet Mask
*10
Default Gateway
*10