Kyocera TASKalfa 7353ci - Adding a User (Local User List)

9-8
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Adding a User (Local User List)
You can add up to 1,000 users (including the default login user name).
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "User Login Setting" [Next] > "Local User List" [Add/Edit]
2
Enter the user information.
[Add] > Enter the user information > [OK]
NOTE
By default, one of each default user with machine administrator rights and administrator privileges is already stored.
Each user's properties are:
Machine Administrator
User Name: DeviceAdmin
Login User Name: TASKalfa 8353ci: 8300, TASKalfa 7353ci: 7300
Login Password: TASKalfa 8353ci: 8300, TASKalfa 7353ci: 7300
Access Level: Machine Administrator
Administrator
User Name: Admin
Login User Name: Admin
Login Password: Admin
Access Level: Administrator
* Upper case and lower case letters are distinguished (case sensitive).
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Item Descriptions
User Name
*1
Enter the name displayed on the user list (up to 32 characters).
Login User Name*
1
Enter the login user name to login (up to 64 characters). The
same login user name cannot be registered.
Login Password Enter the password to login (up to 64 characters). Reenter the
same password for confirmation and select the [OK] key.
Model Name Login User Name Login Password
TASKalfa 7353ci 7300 7300
TASKalfa 8353ci 8300 8300