Kyocera TASKalfa 7353ci - Setting WIA Driver

2-59
Installing and Setting up the Machine > Installing Software
Setting WIA Driver
Register this machine to the WIA Driver. Instructions are based on interface elements as they appear in Windows 10.
1
Display the screen.
1 Click the search box in the taskbar, and enter "View scanners and cameras" in the search
box. Select [View scanners and cameras] in the search list then the Scanners and
Cameras screen appears.
2 Select the same name as this machine from WIA Drivers, and click [Properties].
2
Configure WIA Driver.
NOTE
• In Windows 8.1, click [Search] in charms, and enter "View scanners and cameras" in
the search box. Select [View scanners and cameras] in the search list then the
Scanners and Cameras screen appears.
• In Windows 7, click [Start] button on the Windows and enter [Scanner] in [Program
and File Search]. Click [View scanners and cameras] in the search list then the
Scanners and Cameras screen appears.
1 Click the [Settings] tab.
2 Enter the machine IP addresses or host name.
3 When using SSL, select the checkbox beside SSL.
4 Set units of measurement.
5 Click [OK].
1
2
1
2
5
3
4