9-19
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
2 Set the User Login Administration.
[Use Specific Login User Name]: This option can be used to specify a user name and
password to use the same User login for every FAX job. If this option is selected, the user
does not have to type the name and password for each FAX job.
[Prompt for Login User Name]: A screen for entering the user name and password will be
displayed when attempting a transmission. The user name and password must be entered
each time a transmission is attempted.
3 Click [OK].
Local Authorization
Select whether or not to use Local Authorization.
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "User Login Setting" [Next] > "Local Authorization" [Change]
2
[Off] or [On] > [OK]
When using Local Authorization, the user authentication type must be set to [Local Authentication].
Enabling User Login Administration (page 9-3)
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Model Name Login User Name Login Password
TASKalfa 7353ci 7300 7300
TASKalfa 8353ci 8300 8300
To Next Page
Loading...
