6-49
Using Various Functions > Functions
Sending/Storing
When you have sent/stored the original after specifying the original size and sending/storing size, depending on these
sizes, a margin is created at the bottom, left, or right side of paper. By using the Centering function, the image is placed
with a margin equally created for all edges.
(Value: [Off] / [On])
Border Erase, Border Erase/Full Scan
Erases the black border that forms around the image.
The following modes are available.
Standard
Full Scan
Border Erase Sheet
Border Erase Book
Individual Border Erase
Erase the black frame created in the original. Erasing width is fixed.
Scan originals without white margins. No border erase.
Erase the black frame created in the original. Erasing width can be adjusted.
Erases black borders around the edges and in the middle of the original such
as a thick book. You can specify the widths individually to erase the borders
around the edges and in the center of the book.
You can specify border erase widths individually for all edges.
Advanced
Setup
Functions
Functions
To Next Page
Loading...
