Kyocera TASKalfa 7353ci - Page 337

6-50
Using Various Functions > Functions
NOTE
•[Full Scan] is not displayed when copying.
• The default setting for border erase width can be changed.
Border Erase Default
(page 8-20)
• The default width for back page can be changed.
Border Erase to Back Page
(page 8-20)
Item Value Description
Standard Scan originals with Standard Mode. (Border Erase Width: 2 mm)
Full Scan
*1
*1 Not displayed when copying.
Scan originals without white margins.
Border Erase
Sheet
Border Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00" to 2.00"
(in 0.01" increments)
Set the border erase width.
*2
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys
for entry.
*2 The input units can be changed in System Menu.
Measurement
(page 8-15)
Back Page Same as Front Page, Do Not
Erase
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].
Border Erase
Book
Border Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00" to 2.00"
(in 0.01" increments)
Set the border erase width.
*2
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys
for entry.
Gutter
Back Page Same as Front Page, Do Not
Erase
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].
Individual
Border Erase
Top Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Set the border erase width.
*2
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys
for entry.
Bottom
Left
Right
Original
Orientation
Top Edge on Top, Top Edge on
Left, Auto
Select the orientation of the original
document top edge to scan correct
direction. Select [Original Orientation] to
choose orientation of the originals, either
[Top Edge on Top] or [Top Edge on Left].
Then select [OK].
Back Page Same as Front Page, Do Not
Erase
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].