5-13
Operation on the Machine > Program
2
Execute the program.
Place the originals > [Start] key
Editing Programs
You can change program number and program name.
1
Display the screen.
1 [Home] ( ) key > [Program]
2 Select [Edit].
2
Edit the program.
1 Select the key(s) corresponding to the program number (01 to 50) to change.
2 Select [Edit] to change the program number and program name.
3 [Save] > [Yes]
Deleting Programs
1
Display the screen.
1 [Home] ( ) key > [Program]
2 Select [Edit].
2
Delete the program.
1 Select the key(s) corresponding to the program number (01 to 50) to delete.
2 [Delete] > [Yes]
[Program] can be pressed in each function to call up the program registered for the
function.
Registering Programs (page 5-12)
To Next Page
Loading...
