Kyocera TASKalfa 7353ci - Paper Selection

6-19
Using Various Functions > Functions
Paper Selection
Select the cassette or multipurpose tray that contains the required paper size.
If [Auto] is selected, the paper matching the size of the original is selected automatically.
To select [MP tray], select [Paper Size] and [Media Type], and specify the paper size and the media type. The available
paper sizes and media types are shown in the table below.
NOTE
• Specify in advance the size and type of the paper loaded in the cassette.
Cassette/MP Tray Settings
(page 8-7)
• Cassettes after Cassette 5 are displayed when the optional paper feeder is installed.
Item Value Description
Paper
Size
Standard
Sizes 1
Metric models: A3
*1 *2
, A4-R
*1 *2
, A4
*1*2
, A5-R
*1*2
, A6-R
*1*2
,
B4
*1*2
, B5-R
*1*2
, B5
*1*2
, B6-R
*1*2
, Folio
*1*2
,
216×340 mm
*1 Paper size is automatically detected in the cassette.
*2 Paper size is automatically detected in the multipurpose tray.
Select from the standard size.
Inch models: Ledger
*1*2
, Letter-R
*1*2
, Letter
*1*2
,
Legal
*1*2
, Statement-R
*1*2
, Executive,
12×18"
*1*2
, Oficio II
Standard
Sizes 2
Metric models: Ledger
*1*2
, Letter-R
*1*2
, Letter
*1*2
,
Legal
*1*2
, Statement-R
*1*2
, Executive,
12×18"
*1*2
, Oficio II, 8K, 16K-R, 16K
Select from standard sizes
except Standard Sizes 1.
Inch models:
A3
*1*2
, A4-R
*1*2
, A4
*1*2
, A5-R
*1*2
, A6-R
*1*2
,
B4
*1*2
, B5-R
*1*2
, B5
*1*2
, B6-R
*1*2
, Folio
*1*2
,
8K, 16K-R, 16K, 216×340 mm
Others 1 ISO B5, Envelope #10, Envelope #9, Envelope #6,
Envelope Monarch, Envelope DL, Envelope C5, Envelope C4,
Hagaki (Cardstock)
*2
, Oufuku Hagaki (Return postcard),
Kakugata 2, Youkei 4, Youkei 2, Younaga 3, Nagagata 3
Select from special standard
sizes.
Others 2 Custom 1-4
*3
*3 For instructions on how to specify the custom paper size, refer to the following:
Custom Paper Size
(page 8-12)
Select from custom sizes.
Size
Entry
Metric X: 148 to 457 mm (in 1 mm increments)
Y: 98 to 304 mm (in 1 mm increments)
Enter the size not included in
the standard size.
*4
When you have selected
[Size Entry], use [+]/[-] or the
numeric keys to set the sizes
of "X" (horizontal) and "Y"
(vertical). Select [# Keys] to
use the numeric keys for
entry.
*4 The input units can be changed in System Menu. For details, refer to the following:
Measurement
(page 8-15)
Inch X: 5.83 to 18.00" (in 0.01" increments)
Y: 3.86 to 12.00" (in 0.01" increments)
Media type Plain (60 to 105 g/m
2
), Transparency, Rough, Vellum (52 to 105 g/m
2
), Labels, Recycled,
Preprinted
*5
, Bond, Cardstock, Color, Prepunched
*5
, Letterhead
*5
, Thick (106 g/m
2
and more),
Envelope, Coated, High Quality, Index Tab Dividers, Custom 1-8
*5
Copy
Org./Paper/
Finishing
Custom
Box
Functions
USB
Drive
Functions