9-7
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Password Policy Settings
You can prohibit the setting and use of passwords that do not comply with the password policy.
Setting the Password Policy makes it more difficult to break the password.
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "User Login Setting" [Next] > "Authentication Security" [Next] > "Password Policy Settings"
[Next]
2
Configure the settings.
The following settings can be selected.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Item Descriptions
Password Policy Select whether or not password policy is enabled.
Value: Off, On
Minimum password
length
Set the minimum password length of characters for password.
Value: Off, On (1 to 64 characters)
Password complexity Set the password complexity.
Value
No more than two consecutive identical char: Off, On
At least one uppercase letter (A-Z): Off, On
At least one lowercase letter (a-z): Off, On
At least one number (0-9): Off, On
At least one symbol: Off, On
Maximum password
age
Set the maximum password age.
Value: Off, On (1 to 180 days)
Policy Violated User
List
List of users do not meet password policy requirements.
Model Name Login User Name Login Password
TASKalfa 7353ci 7300 7300
TASKalfa 8353ci 8300 8300
To Next Page
Loading...
