2-45
Installing and Setting up the Machine > Quick Setup Wizard
1
Display the screen.
[System Menu/Counter] key > [Quick Setup Wizard]
2
Select a function.
Energy Saver Setup Configures sleep mode and low power mode.
1. Sleep Mode For Europe
Sleep Timer
Sleep Rules
Except for Europe
Sleep Timer
Sleep Level
2. Low Power Mode Low Power Timer
3.Recovery Mode Energy Saver Recovery Level
4.Weekly Timer Settings Weekly Timer
Schedule
*11
Retry Times
*11
Retry Interval
*11
*1 This is displayed when the option of two FAX Kits has been installed.
*2 Inch version only.
*3 DRD reception mode is available for some countries.
*4 This setting does not appear in some regions.
*5 This function is displayed when [Paper Source Settings] is set to [Specify by Media Type].
*6 This function is displayed when [Paper Source Settings] is set to [Specify by Cassette].
*7 This function is displayed when the Wireless Network Interface Kit (IB-35) is installed.
The Wireless Network Interface Kit is an option for some models. Contact your dealer or our sales or service
representatives for detail.
IB-35 "Wireless Network Interface Kit"
(page 11-6)
*8 This function is displayed when [Network Selection] is set to [Wi-Fi].
*9 This function is displayed when [Network Selection] is set to [Wired Network].
*10 This function is displayed when [DHCP] is set to [Off].
*11 This function is displayed when [Weekly Timer] is set to [On].
If the user authentication screen appears, enter your login user name and login password and select [Login].
The factory default login user name and login password are set as shown below.
Model Name Login User Name Login Password
TASKalfa 7353ci 7300 7300
TASKalfa 8353ci 8300 8300
To Next Page
Loading...
