3-30
Preparation before Use > Preparation for Sending a Document to a Shared Folder in a PC
3
Select [Maintenance].
4
[Scan to Folder Setup Tool for SMB] > [Run].
5
Configure the settings.
1 Select the device to use and click [Next].
The address book of the device appears.
• The machine cannot be detected unless it is on. If the computer fails to detect the
machine, verify that it is connected to the computer via a network cable and that it is
turned on and click [ Refresh].
• If user administration is valid on this machine, the user authentication screen appears.
Log in with administrator privileges or as a user with execution authority.
To Next Page
Loading...
