4-13
Printing from PC > Printing from PC
2 Attach the banner tray to the multipurpose tray.
Fit the openings on the sides of the banner tray onto the tabs on the sides of the
multipurpose tray, and press into place.
3
Load paper.
1 Open the paper width guides on the multipurpose tray to the maximum width.
Make sure that the banner tray is attached so that the paper width guides on the banner
tray are outside the paper width guides on the multipurpose tray.
2 Load banner paper so that it passes under the paper clamp bar.
To Next Page
Loading...
