Kyocera TASKalfa 7353ci - Page 407

8-17
Setup and Registration (System Menu) > System Menu
Paper Jam before Staple The page from which printing is resumed when a paper jam occurs during a job with
stapling can be selected.
Value
Resume at Top of Page: Resume printing from the first page of the document.
Resume at Jammed Page: Resume printing from the page where the jam
occurred.
NOTE
Requires the optional Document Finisher.
Skewed or Multi Originals Set what to do when it is detected that skewed originals or multiple stacked originals
have been sent.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Continue or Cancel Err. Job Set which users can cancel or continue operations for jobs which were paused due to
an error.
Value: All Users, Job Owner Only
NOTE
Administrator can cancel all jobs regardless of this setting.
Staple Waste Full Error Set what to do when the staple waste box becomes full during printing.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
NOTE
Requires the optional 100-sheet Staple Finisher.
Item Description