10-35
Troubleshooting > Troubleshooting
B
C
Message Checkpoints Corrective Actions
Reference
Page
Box is not found. — The specified box cannot be
found. Job is canceled. Select
[End].
—
Box limit exceeded.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear
(page 8-79)
Is [End] displayed on the
screen?
The specified box is full, and no
further storage is available. Job
is canceled. Select [End]. Try to
perform the job again after
printing or deleting data from the
box.
—
— Repeat Copy box is full, and no
further repeat copy is available.
Select [Continue] to print
scanned pages. Select [Cancel]
to cancel the job.
—
Broadcast error — An error has occurred during
broadcast transmission. The job
is canceled. Select [End].
—
Message Checkpoints Corrective Actions
Reference
Page
Calibrating... ― The machine is under the
adjustment to maintain its
quality. Please wait.
―
Cannot Banner Print. ― System stamp is set up.
Banner print cannot be carried
out.
Job is canceled. Select [End].
―
Cannot connect to
Authentication
Server.
*1
— Set machine time to match the
server’s time.
page 2-31
— Check the domain name. page 9-2
— Check the host name. page 9-2
— Check the connection status
with the server.
—
Cannot connect to
Server.
— Check the connection status
with the server.
—
Cannot connect. — This appears when the Wi-Fi or
Wi-Fi Direct connection did not
complete. Check the settings,
and check the signal conditions.
page 8-53
page 8-54
To Next Page
Loading...
