10-38
Troubleshooting > Troubleshooting
Check the paper in the
multipurpose tray.
— The paper size is different. Set
selected size paper and select
[Continue].
page 5-6
Check the side feeder. — The side feeder is not installed
correctly. Attach the side feeder.
―
Check the staple
waste box.
Is the staple waste box full? Follow the instructions on the
screen, and empty the staple
waste box.
page 10-19
— The staple waste box is not
installed correctly. Set it
correctly.
page 10-19
Check the toner
container.
— Open the main unit front cover
and remove the toner container.
Shake carefully and replace.
If you select [Open Toner
Container Cover], you can
open the Toner Container Cover
that you closed accidentally.
―
Checking the waste
toner box.
####
Is the waste toner box full? Replace the toner container.
Reuse the black (K) toner
container as a waste toner box.
Handle the color toner
containers according to the
instructions supplied with them.
Select [Next]. The instructions
will be displayed.
If you select [Open Toner
Container Cover], you can
open the Toner Container Cover
that you closed accidentally.
―
Confidential
document was
detected.
— The machine detects the
document guard pattern. Job is
canceled. Select [End].
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear
(page 8-79)
Message Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
