Included Scanner Tools
3-19
Network 2 Tab
Set Password
Set the administrator’s password.
1
Enter the new password and press the OK button.
NOTE: Enter a password less than 15 characters long.
2
For verification, enter the new password again and press the OK
button.
Item Description
SMTP Server Name Enter into this field the SMTP server hostname in less than 32 characters or
IP address in ‘XXX.XXX.XXX.XXX’ notation.
SMTP Port No. Enter the SMTP port number in this field. The default port is 25.
DB Assistant Enter the IP address or hostname (under 32 characters) of the computer with
DB Assistant installed.
Firmware update To allow firmware upgrades, set to ON; to deny, set to OFF.
E-mail Address Enter the administrator e-mail address. Enter the e-mail address using less
than 64 characters.
Change Password
Button
Set the administrator’s password. (See page 3-19)
SMTP TX
Authentication
Button
Set the administrator SMTP Server Authentication. (See page 3-20)
To Next Page
Loading...
