Included Scanner Tools
3-22
Basic - Universal mode
The setting items are as follows.
Extension
The setting items are as follows.
Setting Item Value Description
Resolution 600dpi, 400dpi, 300dpi, 200dpi Select from the following four
resolutions to scan an original.
Multiple Scanning OFF, ON Select whether to scan originals in a
continuous operation.
File Name Enter the filename using less than 16
characters.
Specify the name used when saving
scanned images.
Setting Item Value Description
Full scan ON, OFF With this mode, you can scan the
entire area of the selected original size
as image when this function is set to
[ON]. You can scan the original to one
size smaller when this function is set to
[OFF]. If you scan the original that is
filled its corner with the contents, a
photo and so on, this function is set to
[ON].
Centering ON, OFF When scanning with zoom, by
specifying the Original size and the
Send size, blank borders around the
bottom or left and right will be shown
depending on the sizes. When setting
Auto Center, the image is moved to the
center so that blank borders around
the top and bottom or left and right
become even.
Uncompress
scanning
ON, OFF This scanner uses MMR compression
when scanning image data. In this
case, when compressing the dots
(especially the closely spaced dots
which make up the more dense areas
of, for example, photographs in printed
material, and can be seen when
looking closely with a magnifying
glass) such as in photographs and
grayscale images, the resulting data
volume may actually be greater than
before it was compressed. You can
select whether or not to have
compression performed automatically
in cases such as these when the
compressed data is greater that the
original data.
To Next Page
Loading...
