Kyocera TASKalfa 820 - Page 73

Included Scanner Tools
3-23
Sender (User)List
Configure the Sender (User) List for use with network scanner functions ( Send E-mail, Scan to PC).
Continuous
sending
ON, OFF Use the same settings from a
previously completed transmission for
the next transmission. The scan
function screen is returned with the
sender (user), destination and other
settings remaining from the previous
operation.
File name Input Manual, Auto/Manual Displays the filename input box
without displaying the auto/manual
selection screen.
Skip sender (user)
select
ON, OFF When using this scanner, a sender
(user) must be first selected. Set to ON
to force the sender (user) to User No.
001 and skip sender (user) selection.
Setting Item Value Description
Item Description
Name As the sender, displays the name displayed at the top of the scanner
operation panel.
E When the address associated with the destination list (E-mail) has been
registered, a * is shown in this field. When editing, the destination list (E-mail)
is also modified.
P When the address associated with the destination list (PC) has been
registered, a * is shown in this field. When editing, the destination list (PC) is
also modified.
Registration
Number
Displays the sender data registration numbers. The registration numbers are
shown as a list on the scanner operation panel. Up to 40 items may be
registered.
E-mail Address Shows the sender e-mail address.
New address
Button
Click this button to create a new sender data. The sender editing dialog box is
shown. (See page 3-24)