EN
4.2 P Self-Powered Coaxial Range
The L-ACOUSTICS
®
ETR8-2, ETR12, and ETR15P mounting accessories are the dedicated U-brackets for wall or
ceiling –mounting the 108P, 112P, and SB15P enclosures, respectively.
The L-ACOUSTICS
®
XTLIFTBAR rigging accessory is dedicated for flying the 112P enclosure.
The system solution developed by L-ACOUSTICS for the P range consists of the elements needed to fully take
advantage of the possible configurations and optimize the system. The main components of the system are:
108P
Self-powered coaxial enclosure
112P
Self-powered coaxial enclosure
SB15P
Self-powered compact subwoofer
ETR8-2
Mounting accessory for the 108P enclosure
ETR12
Mounting accessory for the 112P enclosure
ETR15P
Mounting accessory for the SB15P enclosure
XTLIFTBAR
Rigging accessory for the 112P enclosure
SOUNDVISION
Acoustical and mechanical modeling software
Figure 2: P range components
Each system configuration should be first modeled using the L-ACOUSTICS
®
SOUNDVISION application software
to verify that safe system setup safety limits apply. A detailed description on the use of the SOUNDVISION application
software is beyond the scope of this manual. Please refer to the appropriate documentation, also available on the L-
ACOUSTICS internet website @ www.l-acoustics.com
.
ETR8-2
ETR12
ETR15P
112P
SB15P
SOUNDVISION
108P
XTLIFTBA
To Next Page
Loading...
