What to do if LCD message indicates user assistance needed on Labcyte Echo 520?
If the LCD screen displays a message indicating that user assistance is needed, follow the instructions provided directly on the LCD screen.
How to troubleshoot Echo software connection issues with Labcyte Echo 520?
If the Echo software fails to connect to the Echo liquid handler, you should first attempt to determine the cause of the connection failure. After identifying the cause, try to resolve the problem, and then attempt to launch the software again.
What to do if the compressed air supply is low on Labcyte Laboratory Equipment?
If the user-supplied compressed air supply is low (less than 70 PSI) or nonexistent, increase the air pressure. Consult the section on the 'Compressed air pressure indicator'.
What to do if the process door is neither fully open nor fully closed on Labcyte Laboratory Equipment?
If the process door of the Labcyte Laboratory Equipment is neither fully open nor fully closed, check for any obstructions that may be preventing its full movement. Also, verify the compressed air pressure, as it could be too low. For more information, refer to the section on 'Compressed air pressure indicator'.
What to do if the vacuum pressure is low on Labcyte Echo 520?
If the user-supplied vacuum pressure is low (less than 15 in Hg Vac) or nonexistent, increase the vacuum pressure. See the section 'Vacuum supply pressure indicator'.
What causes the upper anti-static bar to be neither fully up nor fully down on Labcyte Laboratory Equipment?
If the upper anti-static bar is neither fully up nor fully down, check the compressed air pressure. See the section 'Compressed air pressure indicator'.
What to do if the source plate dryer nozzle is neither fully up nor fully down on Labcyte Echo 520?
If the source plate dryer nozzle is neither fully up nor fully down, check the compressed air pressure. See the section 'Compressed air pressure indicator'.
What to do if Echo stages are not homed on Labcyte Echo 520?
If the Echo stages (acoustic transducer, source plate, and destination plate) are not homed, perform Home calibration. See the section 'Home calibration'.
What to do if the client PC indicates a problem with Labcyte Echo 520 Laboratory Equipment?
If the client PC indicates a problem, this message is generated by custom programming. Contact your System Administrator.
Outlines essential safety guidelines for operating the Echo liquid handler.
Details critical electrical safety precautions for the Echo liquid handler.
Provides further safety warnings related to laser, voltage, and handling.
Explains the function and use of the Emergency Motion Off switch.
Explains the core technology of liquid transfer using acoustic energy.
Lists site and environmental requirements before installation.
Specifies environmental and physical space needs for installation.
Details the process for installing the Echo software.
Covers preparing, moving, and reinstalling the instrument.
Covers procedures for powering the Echo liquid handler on and off.
Guides on defining and executing liquid transfer protocols.
Manages protocols, allowing creation, editing, and running.
Provides control and monitoring options for Echo status.
General| Brand | Labcyte |
|---|---|
| Model | Echo 520 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
