Manual Operation 4-1
C HAPTER
4
CHAPTER 0MANUAL OPERATION
This chapter describes the manual operation of the Echo
®
Liquid Handler,
which involves a human operator performing the following procedures:
Startup/Shutdown
Main screen
Create liquid transfer protocol
Start liquid transfer run
This chapter takes the reader through the basic steps necessary to transfer
sample from one plate to another with the Echo liquid handler. It is
intended to present the entire range of activity in a start-to-finish flow. It is
not intended to provide all of the information necessary to understand
each individual step.
Refer to the chapter, “Echo Liquid Handler Software” on page 5-1, for a
detailed description of each software function.
To Next Page
Loading...
