15
MAINTENANCE
DANGER
FIGURE #1.2
FIGURE #1.3
1.1.10 PROPPING PROCEDURES
NEVER WORK UNDER, OR CLOSE
TO EQUIPMENT OR ANY PART
THAT IS NOT SAFELY PROPPED
OR SECURED.
ALWAYS USETHE PROVIDED
STEP LADDERS (OR ANY OTHER
SAFE LADDER TO WORK
TOWARDS THE FRONT) TO GET
ON THE ROOF OR TO WORK ON
HIGHER PARTS OF THE
EQUIPMENT. REMEMBER THAT
THE ROOF IS NOT MEANT TO BE
WALKED UPON. BE VERY
CAUTIOUS IF YOU HAVE TO
WORK ON THE ROOF AREA.
ALWAYS FOLLOW PROPER
LOCKOUT/TAGOUT PROCEDURE
(SECTION 1.1.4).
CLEANING BEHIND
THE PACKER BLADE
HOPPER DOOR
ALWAYS USE THE TAILGATE
SAFETY PROP WHEN WORKING
UNDER A RAISED TAILGATE.
PROP CAN BE INSTALLED EVEN
IF THE TAILGATE HAS TO BE IN
IT’S FULLY RAISED POSITION.
The tailgate has its own safety prop system. The
prop is installed when the tailgate is slightly
open. The tailgate, when open, should always
rest against the safety prop.
DANGER
To Next Page
Loading...
