59
TROUBLESHOOTING
TAILGATE HYDRAULIC
TROUBLESHOOTING
1. Apply all safety measures to ensure
safety around the vehicle at all
times;
2. Ensure that the parking brake is
applied;
3. Remove the velocity fuse
(Figure #3.3) and verify that it is
clean and that the plunger is moving
freely. A new velocity fuse may be
necessary.
Problem #2:
Tailgate is LOWERING by itself
One other problem that may be found on the
tailgate hydraulic system is that it would
lower by itself. A faulty velocity fuse might be
involved. Apply the procedure below in order
to verify and /or replace the velocity fuse.
REAR TAILGATE
REAR TAILGATE
SAFETY PIN
To Next Page
Loading...
