Fusion 3 Table Saw \ Setup \ Inventory List
Inventory
List
Your F3 Fusion table saw will likely be delivered by a third-party delivery service. Before unpacking your new machine, first
inspect the packaging, the invoice, and the shipping documents supplied by the driver. When unpacking your table saw,
separate all enclosed items from the packing materials and inspect them for damages. Ensure that there is no visible
damage to either the packaging or the machine BEFORE the driver leaves. Save all packaging materials until you are
satisfied with the machine and/or have resolved any issues concerning any missing or damaged items.
NOTICE! All shipping damage must be noted upon delivery and signed by the owner and the delivery driver. If you find any
damaged items in your package, you must contact Laguna Tools to file a complaint. In order to return damaged goods
under the limited warranty to Laguna Tools, Inc., you MUST have the original packaging. All claims of loss or damaged
goods must be reported to Laguna Tools within 24 HOURS of delivery. Please contact the Laguna Tools, Inc. Customer
Service Department to make claims for any damaged items/parts.
Loose Parts Inventory
The following depicts items shipped with your machine. Before assembling your saw, ensure that you have received all
parts shown below. Machine parts should arrive sealed in plastic bags. Remove parts from plastic bags before laying them
out to inventory them.
Boxed with Outboard Table
Rear Extension Table Legs
Each
leg
Boxed
individually
Plastic Wrapped Individually
To Next Page
