LAI Games Let’s Bounce - Assembly Steps: Playfield Frame; Steps 6-9: Attaching Playfield

13
6. Align the bounce pad studs to the holes and lock using the same nut that was unlocked in
step 4.
7. Plug in the connector pictured.
8. Carefully place the playfield frame on its side. Take care not to damage or dent the frame.
9. Unlock the hex bolts at the rear and bottom of the playfield frame. 4 x hex bolts on the rear,
and 4 on each side.
CAUTION: At least two people should be present to perform steps 8 to 10.