38
PARTS DESCRIPTION
HEADER DISPLAY
The header is a static sign illuminated by LED strip lighting.
BACKBOARD
The backboard at the rear of the game mounts the speakers, FB63 timer display, FB44 score displays,
and LED strip lamps. All components are accessible by removing the guards behind the backboard.
SPEAKERS
Two component speakers are wired to the left and right outputs from the FB106 sound board. Each
speaker pair consists of a crossover, woofer speaker and tweeter speaker.
PLAYFIELD
The playfield consists of 45 tiles. Each tile is a delicate assembly containing one FB205 Sensor PCB.
The FB205 is a sensitive PCB used to detect the vibration caused by a ping-pong ball hit. Extra care
should be taken when handing and cleaning so as not to damage the mounting.
Each FB205 is programmed with firmware and communicates with the FB216 using an RS485 data
bus. Ensure DIP switches on each FB205 are set so that each PCB has a unique address as defined in
the image below. Correct addressing is critical and starts as 1 and increases to 45 from left to right
and from front to back.
CAUTION: Take care when working around the playfield tiles and ensure mounting
mechanism is not damaged.
To Next Page
Loading...
