8
INTRODUCTION
Congratulations on your purchase of Let’s Bounce by LAI Games. We hope you take the time to read
this manual and learn about the many features and user-friendly adjustments that can be made to
fine-tune the game for maximum earning potential.
DESCRIPTION
Let’s Bounce is an addictive and rewarding single or two player game that is easy to play but hard to
master. Players bounce ping pong balls across a field of illuminated tiles, aiming to hit each tile at
least once and clear the playfield, before the time runs out.
PACKAGING
CONTENTS
• Let’s Bounce unit
• Operator Manual
• 4 x coin door keys
• 200 x Ping pong balls
• 1 x Power cord
• 3 x O-Ring
• 1 x Allen Key 4
• 1 x Allen Key 2.5
• 1 x Wrench 17
• 1 x Fuse 6.3A
• 1 x Programming harness
• 1 x Optional NRI coin mech harness
SPECIFICATIONS
DIMENSIONS
• Weight: 431kg (950.19lb) (excluding packaging)
• Weight: 501kg (1104.52lb) (including packaging)
• Height: 2245mm (88.4”) (excluding header)
• Height: 2848.7mm (122.1”) (including header)
• Width: 1222mm (48.1”)
• Length: 3130mm (123.2”)
• Power: Maximum 600W
ELECTRIC SUPPLY
The game can operate on a universal mains input voltage between 85-266VAC 47/63Hz single phase.
The supply must be a three-wire grounded supply. An adjustment screw is available for fine-tuning
the output voltage.
LOCATION REQUIREMENTS
• Ambient temperature: 5C - 40C
• Ambient humidity: Low
• Ambient U.V. radiation: Very low
• Vibrations level: Low
To Next Page
Loading...
