23
6. Coin 2 Multi Bonus Credits Default Off, Adjustable On / Off
Turn on the first stage of bonus credits for coin mech 2. Turning this setting on, will activate
settings 6-1 to 6-6.
6.1. Coin 2, Stage 1, Number of Coins Default Off, Adjustable Off / 1 – 99
This sets the number of coins that need to be inserted into coin mechanism 2 to reach the
bonus credit stage 1.
This setting is only active if setting 6 is ON.
6.2. Coin 2, Stage 1, Number of Bonus Credits Default Off, Adjustable Off / 1 – 99
This sets the number of bonus credits that are given when credit stage 1 is reached.
This is the number of bonus credits given, on top of what has been paid for.
This setting is only active if setting 6 is ON.
6.3. Coin 2, Stage 2, Number of Coins Default Off, Adjustable Off / 1 – 99
This sets the number of coins that need to be inserted into coin mechanism 2 to reach the
bonus credit stage 2.
This setting is only active if 6-1 and 6-2 are active.
6.4. Coin 2, Stage 2, Number of Bonus Credits Default Off, Adjustable Off / 1 – 99
This sets the number of bonus credits that are given when credit stage 2 is reached.
This is the number of bonus credits given, on top of what has been paid for.
This setting is only active if 6-1 and 6-2 are active
6.5. Coin 2, Stage 3, Number of Coins Default Off, Adjustable Off / 1 – 99
This sets the number of coins that need to be inserted into coin mechanism 2 to reach the
bonus credit stage 3.
This setting is only active if 6-3 and 6-4 are active.
6.6. Coin 2, Stage 3, Number of Bonus Credits Default Off, Adjustable Off / 1 – 99
This sets the number of bonus credits that are given when credit stage 3 is reached.
This is the number of bonus credits given, on top of what has been paid for.
This setting is only active if P6-3 and P6-4 are active.
7. Common Coin Default Off, Adjustable On / Off
If the setting is ON, coin 1 and coin 2 contribute to the same coin pool. If the setting is off, they
are counted separately.
This setting is only active is P20, Card System, is set to off.
8. Attract Sound Default 3 minutes, Adjustable Off, On, 2m, 3m, 4m, 5m, 10m, 30m
Controls the delay between the attract mode audio loop repeating.
9. Error Message Alert Default Display & Audio, Adjustable Display & Audio, Audio Only, Display
Only, Off
Controls how the game indicates an error has occurred. Errors can be shown on the display
and/or with an error voice message that is played through the speakers, or hidden completely.
10. Free Mode Default Off, Adjustable On / Off
Sets if the game requires a credit to start playing. If set to on, the game can be played for free.
To Next Page
Loading...
