LAI Games Let’s Bounce - Troubleshooting: Firmware Errors; EEPROM Program Settings and Firmware Errors

30
PSet Error
The CPU cannot read or write
to its on-board EEPROM
program settings or is
receiving errors during
communication with the
EEPROM.
Clear the error by viewing it in
the errors menu and pressing
the right button.
If the error still occurs, the IC is
faulty and needs to be
replaced.
EEP NJ Error
Only applicable to New Jersey
firmware
EEPROM memory related to
the NJ game state saving
system can’t be read.
Clear the error by viewing it in
the errors menu and pressing
the right button.
If the error still occurs, the IC is
faulty and needs to be
replaced