10
2 General Safety Instructions
WARNING!
Danger from electrical shock
The device contains live parts and touching these parts could cause electric shock.
Before opening the housing, disconnect the mains plug!
Decommissioning/recommissioning
The Lambda Transmitter LT3 Combination Probe KS1D are a high-quality,
electronic measuring system. It therefore requires careful handling in all situations - decom-
missioning, transport, and storage.
NOTICE
Do not switch off the Lambda Transmitter LT3 as long as the KS1D Combination Probe is
mounted. Not even if the associated plant has been brought to a standstill. Residual gases will
cause corrosion and could damage the probe.
Do not store the device outside without any protection!
Always store in a dry location and, if possible, keep in the original packaging.
When uninstalling, protect the ends of cables and the connectors from corrosion and soil-
ing. Corroded connectors can cause malfunctions.
If possible, always transport in the original packaging.
To Next Page
Loading...
Need help?
General
