Lamtec LT3 - Display and Operational Controls

11
3 Product Description
3 Product Description
3.1 Designs and Accessories of the KS1D Combination Probe
The KS1D Combination Probe permits a simultaneous measurement
of the O
2
concentration and combustible, oxidising gas components (CO/H
2
) displayed as
CO equivalent (CO
e
), in the flue gases from combustion systems in the superstoichiometric
area (>1) in situ (directly in the flue gas).
Fig. 3-1 Standard design of the KS1D Combination Probe
Fig. 3-2 KS1D Combination Probe without housing
Alternatively:
Fig. 3-3 KS1D Combination Probe in HT design
1 KS1D Combination Probe in standard housing
Standard cable length 2 m, FEP, with connecting plug
2 Probe installation fitting (PIF)
3 Measuring gas extraction device (GED)
1 KS1D-HT Combination Probe high-temperature
Standard cable length 2 m, FEP, with connecting plug
2 Flue gas bypass tube