2.2 SET MVU FOR FLAVOR SHOTS
A. Press both A and C brand buttons (at the same
time) on the MVU panel for ve seconds to get
into programming mode.
B. Press the “Shot” button.
1. The “Shot” button will illuminate.
2. Brands enabled for shots will be illuminated.
C. Press the “Brand” button to turn the shot mode for
that brand on or off.
1. The shot mode is “ON” in the illustration.
D. Press “Shot” again to return to “Drink Type
Selection”
E. Press the Pour/Cancel button to lock the changes
in place and exit the programming mode.
NOTE: The program will save automatically in 60
seconds if no additional changes are made in that
time frame; however, you can exit any time within the
60 second window by pressing Pour/Cancel. The
changes you’ve made will be saved.
12
To Next Page
Loading...
